Harman Kardon AVR 1700 Quick Setup Manual

Also see for AVR 170: Owner's manual Service manual

Contents

Harman Kardon AVR 1700 Quick Setup Manual Manual pdf 7 page image

EnglishConnectionsAVRConnect to AC PowerConnect the AC power cord to the AVR’s AC Input connector and then to a working,non-switched AC power outlet. IMPORTANT: Before connecting the AC power cord, make surethat the AC voltage listed on the AVR’s back panel matches the AC voltage used in your country.AVR ACInput ConnectorAC PowerOutletPower Cord (supplied)Set Up the AVRInstall the Batteries in the Remote ControlRemove the remote control’s battery cover, insert the three supplied AAA batteries as shownin the illustration, and replace the battery cover.NOTE: Remove the protective plastic from the AVR’s front panel so it doesn’t reduce theremote control’s effectiveness.Turn On the AVR1. Set the rear-panel Main Power switch to “On.” (The front-panel Power indicator willglow amber.)2. Press the front-panel Power button.Main PowerSwitchPowerButtonConfigure the AVR for Your SpeakersOne of the most important steps in setting up a home theater system is to calibrate theAVR to match your loudspeakers, optimizing sound reproduction. Your AVR features theHarman Kardon EzSet/EQ™ system, which performs this calibration automatically usingthe supplied EzSet microphone.You will be using the following remote cotnrol buttons to configure your AVR:Cable/SatAuxToneDirectMEMNight RDSCLRDelayGame STBAudio Radio USB NetworkDiscServerOptionsSleepBackLastGuideOSDOK ButtonAVR Button OSD ButtonBack ButtonLeft/Right/Up/Down Buttons1. Plug the supplied EzSet/EQ™ microphone into the AVR’s Headphone connector.AVRHeadphoneConnectorEzSet Microphone(supplied)2. Place the microphone at ear height in your listening position.3. Turn on your TV and select the TV input where you connected the AVR in Connect YourTV, on page 3.4. Press the remote control’s AVR button, then press the OSD button. The AVR’son-screen display (OSD) Master Menu will appear on the TV. (Note: If you have onlyused a composite video connection to your TV, the OSD menus will not appear on yourTV. Follow the steps below using the receiver’s front-panel display.)M A S T E R M E N US o u r c e S e l e c tS o u r c e S e t u pS u r r o u n d M o d eE z S e t / E QM a n u a l S e t u pN e t w o r kS y s t e m S e t u p7