REAR-PANEL CONNECTIONS 7•∞¶ ⁄ fiª¡£‹°bdgji a37 35™¢§‚ ¤ ›fl‡·cefh38 36 3433k3231REAR-PANEL CONNECTIONS¡ FM Antenna Jack™ CD Audio Inputs£ Tape Outputs¢ Tape Inputs∞ Remote IR Input§ Remote IR Output¶ Preamp Outputs• Subwoofer Outputª Front Speaker Outputs‚ Surround Back Speaker Outputs⁄ Surround Speaker Outputs¤ Center Speaker Outputs‹ Video 2 Component Video Inputs› DVD Component Video Inputsfi Component Video Monitor Outputsfl AC Power Cord‡ Switched AC Accessory Outlet° Unswitched AC Accessory Outlet· Optical Digital Audio Outputa Coaxial Digital Audio Outputb S-Video Monitor Outputc Coaxial Digital Audio Inputsd DVD S-Video Inpute Video 1 S-Video Inputf Optical Digital Audio Inputsg Video 1 S-Video Outputh Video 2 S-Video Inputi Video 2 S-Video Outputj 6/8-Channel Direct Inputsk Video 3 S-Video InputVideo Monitor OutputDVD Audio/Video InputsVideo 1 Audio/Video InputsVideo 1 Audio/Video OutputsVideo 2 Audio/Video InputsVideo 2 Audio/Video OutputsVideo 3 Audio/Video InputsAM Antenna Terminals3837363534333231NOTE: To assist in making the correct connections formultichannel input, output and speaker connections,all connection jacks and terminals are color-codedin conformance with the CEA standards as follows:Front Left: WhiteFront Right: RedCenter: GreenSurround Left: BlueSurround Right: GraySurround Back Left: BrownSurround Back Right: TanSubwoofer: PurpleCoaxial Digital Audio: OrangeComposite Video: YellowComponent Video “Y”: GreenComponent Video “Pr”: RedComponent Video “Pb”: Blue¡ FM Antenna Jack: Connect the supplied indoor (oran optional external) FM antenna to this terminal.™ CD Audio Inputs: Connect these jacks to theanalog audio output of a compact disc player or CDchanger.£ Tape Outputs: Connect these jacks to theRECORD/INPUT jacks of an audio recorder.¢ Tape Inputs: Connect these jacks to thePLAY/OUT jacks of an audio recorder.∞ Remote IR Input: If the AVR 230’s front-panelIR sensor is blocked due to cabinet doors or otherobstructions, an external IR sensor may be used.Connect the output of the sensor to this jack.§ Remote IR Output: This connection permits theIR sensor in the receiver to serve other remote con-trolled devices. Connect this jack to the “IR IN” jack onHarman Kardon (or other compatible) equipment.¶ Preamp Outputs: Connect these jacks to anoptional, external power amplifier for applicationswhere higher power is desired.NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this productat www.harmankardon.com.