2 TABLE OF CONTENTS3 Introduction4 Safety Information4 Unpacking5 Front Panel Controls7 Rear Panel Connections10 Main Remote Control Functions13 Installation and Connections13 Audio Connections13 Video Connections14 HDMI Connections14 SCART A/V Connections16 System and Power Connections17 Speaker Selection17 Speaker Placement18 System Configuration18 First Turn On18 Using the On-Screen Display18 System Setup19 Input Setup20 Surround Setup21 Night Mode Settings22 Configuring the Surround Off(Stereo) Modes23 Automated Speaker Setup Using EzSet+25 Manual Setup25 Speaker Setup28 Delay Settings29 Output Level Adjustment32 Operation32 Surround Mode Chart34 Basic Operation34 Source Selection34 6/8-Channel Direct Input35 Controls and Use of Headphones35 Surround Mode Selection35 Digital Audio Playback36 Dolby Digital36 DTS36 PCM Audio Playback36 Selecting a Digital Source36 Digital Bitstream Indicators36 Surround mode Types37 Surround Mode Post Processing37 PCM Playback Indications37 Speaker/Channel Indicators39 Night Mode39 Tape Recording39 Using The Bridge40 Output Level AdjustmentWith Source Signals40 Dim function40 Memory backup41 System Setup41 Front Panel Display Fade41 Turn-On Volume Level41 Semi-OSD Settings42 Full-OSD Time Out Adjustment42 Default Surround Mode42 Full-OSD Background Color42 Multiroom Operation42 Multiroom42 Installation43 Multiroom Setup43 Surround Amplifier Channel Assignment43 Multiroom Operation44 Tuner Operation44 Basic Tuner Operation44 Station SelectionTable of ContentsTypographical ConventionsIn order to help you use this manual with the remote control, front-panel controls and rear-panelconnections, certain conventions have been used.EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panelconnection jackEXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display1 – (number in a square) indicates a specific front-panel control – (number in a circle) indicates a rear-panel connection0 – (number in an oval) indicates a button or indicator on the remoteå – (letter in an oval) indicates a button on the Zone II remoteThe appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from theillustrations in this manual. Whether the text appears in all uppercase or upper- and lowercasecharacters, performance and operation remain the same.Declaration of ConformityWe, Harman Consumer Group, Inc.2, route de Tours72500 Château-du-Loir,FRANCEdeclare in own responsibility, that the productdescribed in this owner’s manual is in compliancewith technical standards:EN 55013:2001 + A1:2003EN 55020:2002 + A1:2003EN 61000-3-2:2000EN 61000-3-3:1995 + A1:2001EN 60065:2002Jurjen AmsterdamHarman Consumer Group, Inc.02/0744 Preset Tuning45 RDS Operation45 RDS Tuning45 RDS Display Options45 Program Search46 Programming the Remote46 Programming the Remote with Codes46 Direct Code Entry46 Auto Search Method46 Code Readout47 Macro Programming47 Programmed Device Functions47 Volume Punch-Through48 Channel Control Punch-Through48 Transport Control Punch-Through48 Resetting the Remote Memory49 Function List51 Troubleshooting Guide51 Processor Reset52 Technical Specifications53 Appendix - Settings Worksheet