Harman Kardon AVR 320 Owner's Manual

Also see for AVR 320: Manual Service manual Product information Service manual Owner's manual

Harman Kardon AVR 320 Owner's Manual Manual pdf 33 page image

33 OPERATIONOperationRepeat the procedure as needed until all chan-nels requiring adjustment have been set. Whenall adjustments have been made and no furtheradjustments are made for five seconds, theAVR 320 will return to normal operation.The channel output for any input may also beadjusted using the full-OSD on-screen menusystem. First, set the volume to a comfortablelistening level using the Volume Controlı î. Then, press the OSD Button vto bring up the MASTER MENU (Figure 1).Press the ¤ Button n four times until theon-screen › cursor is next to the CHANNELADJUST line. Press the Set Button p@to activate the CHANNEL ADJUST menu.Once the menu appears on your video screen,first use the ⁄ / ¤ Buttons n to move theon-screen › cursor so that it is next to theTEST TONE line. Press the ‹/› Buttonso so that OFF is highlighted. This willturn off the test tone and allow you to use yourexternal test disc or other source material asthe reference. Then, use the ⁄ / ¤ Buttonsn to select the channels to be adjusted. Ateach channel position use the ‹/› Buttonso to change the output level.Remember, the goal is to have the output levelat each channel be equal when heard at thelistening position.If you wish to reset all the levels to their origi-nal factory default of 0dB offset, press the⁄ / ¤ Buttons n so that the on-screen cur-sor is next to the CHANNEL RESET lineand press the ‹/› Buttons o so thatthe word ON is highlighted. After the levelsare reset, resume the procedure outlined aboveto reset the levels to the desired settings. Whenall adjustments are done, press the ⁄/¤Buttons n to move the on-screen › cursorso that it is next to RETURN TO MAS-TER MENU and then press the Set Buttonp if you wish to go back to the main menuto make other adjustments. If you have noother adjustments to make, press the OSDButton v to exit the menu system.NOTE: The output levels may be separatelytrimmed for each digital and analog surroundmode. If you wish to have different trim levels fora specific mode, select that mode and then followthe instructions in the steps shown earlier.6-Channel/8-Channel Direct InputThe AVR 320 is equipped for future expansionthrough the use of optional, external adaptersfor formats that the AVR 320 may not becapable of processing or to allow connectionto the output of high-resolution optical audioplayback systems such as DVD-Audio or SACD.When a device with six-channel outputs (5.1audio) is used, connect the source device to the6-Channel Direct Inputs ª. When a devicewith eight-channel outputs (7.1) audio is used,connect the additional Surround Back Left (SBL)and Surround Back Right (SBR) outputs to the8-Channel Direct Inputs ‚ on the AVR. Toselect these inputs, press the 6-Channel/8-Channel Direct Button h on the remoteuntil the desired input configuration appears inthe Main Information Display Y.Note that when the 6-Channel or 8-ChannelDirect Input is in use, you may not select a sur-round mode, as the external decoder deter-mines the processing in use. In addition, thereis no signal at the record outputs or bass man-agement when the 6-Channel or 8-ChannelDirect Input is in use.Memory BackupThis product is equipped with a memory back-up system that preserves the system configura-tion information and tuner presets if the unit isaccidentally unplugged or subjected to a poweroutage. This memory will last for approximatelytwo weeks, after which time all informationmust be reentered.37373740