ZONE II REMOTE CONTROL FUNCTIONSå Power Off Button: When used in the roomwhere the AVR 435 is located, press this buttonto place the unit in Standby. When it is used in aremote room with a sensor that is connected to theMultiroom IR Input Jack f, this button turns theMultiroom system on and off.∫ AVR Selector Button: Press this button to turnon the AVR 435. The input in use when the unit waslast on will be selected.ç AM/FM Tuner Selector: Press this button toselect the Tuner as the input to the Multiroom system.Press it again to change between the AM and FMbands.∂ Input Selectors: When the AVR 435 is off,press one of these buttons to select a specific inputand turn the unit on. When the unit is already in use,pressing one of these buttons will change the input.≠ Tuning Up/Down – Fast Play Buttons: Whenthe Zone II remote is used in the same room as theAVR 435, these buttons may be used to change thefrequency of the tuner. These buttons may also controlthe Fast Play or Fast Reverse functions of compatibleHarman Kardon CD, DVD or cassette decks in thesame room, or from a remote room when an IR linkis connected to the AVR 435.ƒ Record/Pause Button: Press this button toactivate the Record or Pause function on compatibleHarman Kardon CD, DVD or cassette deck products.© Preset Up/Down – Track Skip Buttons: Whenthe AVR 435’s tuner is selected as the input source,these buttons will move up or down through the list ofstations that have been stored in the preset memory.When a CD or DVD changer or player is selected,these buttons activate the Forward or Reverse Trackor Chapter Skip functions.˙ Disc Skip Buttons: Press these buttons tochange discs on compatible Harman Kardon CD orDVD changers or players.Volume Up/Down Buttons: When the Zone IIremote is used in the room where the AVR 435 islocated, press this button to raise or lower the volumein that room. When it is used in a remote room with asensor that is connected to the Multiroom IR InputJack f, this button will raise or lower the volume inthe remote room.∆ Play Forward/Reverse/Stop Buttons: Pressthese buttons to control compatible Harman KardonCD, DVD or cassette players.˚ Mute Button: When the Zone II remote is usedin the room where the AVR 435 is located, press thisbutton to temporarily silence the unit. When it is usedin a remote room with a sensor that is connectedto the Multiroom IR Input Jack f, this button willtemporarily silence the feed to the remote roomonly. Press the button again to return to the previousvolume level.˙å∫ç∂≠ƒ©Iå Power Off Button∫ AVR Selector Buttonç AM/FM Tuner Selector∂ Input Selectors≠ Tuning Up/Down – Fast Play Buttonsƒ Record/Pause Button© Preset Up/Down – Track Skip Buttons˙ Disc Skip ButtonVolume Up/Down Buttons∆ Play Forward/Reverse/Stop Buttons˚ Mute Button˙å∫ç∂≠ƒ©IPOWEROFFMUTEAVRAM//FMVID1VID3DVD CD TAPEDN TUNINGPRESETVOLUMEDISC SKIPDISC SKIPUPDNUPVID4VID2GABCDEFHIKJNOTES:• The Zone II remote may be used in either the same room where the AVR 435 is located or in a separateroom with an optional infrared sensor or A-BUS product that is connected to the AVR 435’s Multiroom IR InputJack f. When it is used in the same room as the AVR 435, it will control the functions of the AVR 435 or anycompatible Harman Kardon products in that room. When it is used in a separate room via a sensor connected tothe Multiroom IR Input Jack f, the buttons for Power, Input Source, Volume and Mute will control the sourceand volume for the second zone, as connected to the Multiroom Audio Output Jacks . (See page 41 forcomplete information on using the Multiroom system.)• To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a largercopy may be downloaded from the Product Support section for this product at www.harmankardon.com.3334353637383940414849464744454243383940413132302829252627282930242322212031373635343332 3137363534333248495051474645444342ZONE II REMOTE CONTROL FUNCTIONS 15