Harman Kardon DVD 27 Owner's Manual

Also see for DVD 27: Brochure Brochure Brochure Reference guide Connection guide

Harman Kardon DVD 27 Owner's Manual Manual pdf 10 page image

10 REAR PANEL CONNECTIONSRear Panel Connections ¡ Optical Digital Output™ Coaxial Digital Output£ AC Power Cord¢ Composite Video Output∞ S-Video Output§ Component Video Outputs¶ Scart TV Output• Remote Control Outputª Remote Control Input‚ Analog Audio Output¡ Optical Digital Output: Connect this jackto the optical digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.™ Coaxial Digital Output: Connect this jackto the coaxial digital input of an A/V receiver orsurround processor for Dolby Digital, DTS orPCM audio playback.NOTE: The coaxial digital output should only beconnected to a digital input. Even though it isthe same RCA-type connector as standardanalog audio connections, DO NOT connect it toa conventional analog input jack.£ AC Power Cord: Connect this plug to anAC outlet. If the outlet is controlled by a switch,make certain that it is in the ON position.¢ Composite Video Output: Connect thisjack to the video input on a television or videoprojector, or to a video input on an A/V receiveror processor if you are using that type of devicefor video input switching.∞ S-Video Output: Connect this jack to theS-Video input on a television or video projector,or to an S-Video input on an A/V receiver orprocessor if you are using that type of device forS-Video input switching.§ Component Video Outputs: These out-puts carry the component video signals forconnection to display monitors with componentvideo inputs. For standard analog TV's orprojectors with inputs marked Y/Pr/Pb orY/Cr/Cb, connect these outputs to the correspon-ding inputs. If you have a high-definition televi-sion or projector that is compatible with highscan rate progressive video, connect these jacksto the “HD Component” inputs. Note that if youare using a progressive scan display device, then”Progressive” must be selected in the Video Set-up Menu in order to take advantage of theprogressive scan circuitry. See page 19 for moreinformation on progressive scan video.IMPORTANT: These jacks should NOT be con-nected to standard composite video inputs.¶ SCART OUT (TV): If your TV has a SCARTsocket, you can connect a SCART cable to yourTV and to your DVD Player for improved videoquality. The SCART cable carries both audio andvideo. You can select Composite Video or RGBvideo for that SCART connector’s video outputsignal.• Remote Control Output: Connect thisjack to the infrared (IR) input jack of anothercompatible Harman Kardon remote controlledproduct to have the built-in Remote Sensor onthe DVD provide IR signals to other compatibleproducts.ª Remote Control Input: Connect the out-put of a remote infrared sensor, or the remotecontrol output of another compatibleHarman Kardon product, to this jack. This willenable the remote control to operate even whenthe front panel Remote Sensor on the DVD isblocked. This jack may also be used withcompatible IR remote control-based automationsystems.‚ Analog Audio Output: Connect thesejacks to an audio input on an A/V receiver orsurround processor for analog audio playback.Note: You’ll find more details about allAudio/Video connections under Setup andConnections on the following pages.