Harman Kardon DVD 5 Owner's Manual

Also see for DVD 5: Brochure Owner's manual Owner's manual Specifications Service manual

Harman Kardon DVD 5 Owner's Manual Manual pdf 16 page image

16 SETUP MENUFigure 1To navigate through the settings on the screen,use the ⁄/ ¤ Navigation Buttons e toscroll up or down through the list of settings orthe list of options. Press the ‹/ › NavigationButtons to move back and forth between thelist of settings and the list of options for thosesettings. To choose a specific option, use the⁄/ ¤ Navigation Buttons e until it ishighlighted. Press the Enter Button d toselect the choice. When a selection is made,you may confirm the choice by checking to seethat a black dot fills the “radio button” circlenext to the choice. This filled circle, not thehighlighted option, is the active choice.Audio Language SelectionThe Audio Language option sets the defaultchoice for the language that will be playedfrom a DVD disc.To select the language default, you must beviewing the Setup Menu (Figure 1), which isavailable by pressing the Menu Button `while the unit is in the Stop mode. AudioLanguage Selection is the first option, so it willautomatically be highlighted in dark blue whenthe Setup Menu is displayed.To change the default Language, press the ›Navigation Button e and note that the listof system defaults will be replaced with a list ofthe available options, as shown in Figure 2. Thecurrent language choice will be indicated by afilled-in circle on the list on the right side ofthe screen.Figure 2To change the default setting, press the ⁄/ ¤Navigation Buttons e until the desiredchoice is highlighted, and then press the EnterButton d. Note that the circle for yourchoice will fill in, and the menu will return tothe default listings.If you wish to change the default to a languageother than English, Spanish or French, press the⁄/ ¤ Navigation Buttons e until the“Other” line on the bottom is highlighted.Consult the Language Codes lists on page 30for the desired language. Press the EnterButton d, and then enter the four-digit codefrom the list using the Numeric Keys o.Although your selection will be entered, theword “Other” will appear on the default list.Note that when a default language is selected,it will be used whenever that language is pres-ent on the DVD disc being played. However,when that language is not present, the lan-guage used will be the one preprogrammedinto the disc itself. (Typically, that default willbe English for discs sold in Region 1, but theselection will vary at the discretion of the disc’sproducer.)Although the default will set the language thatwill be used when a disc is first put into play,the language may easily be changed at anytime by using the Audio Button a. Seepage 25 for more information.If you have no other changes to make after set-ting this default, press the Menu Button `to remove the Setup Menu from the screen, orpress the Play Button g/@ to begin orresume playback.Subtitle Language SelectionThe Subtitle Language option sets the defaultchoice for the language that will be displayedwhen subtitles are turned on during DVDplayback.To select the Subtitle Language default, youmust be viewing the Setup Menu (Figure 1),which is available by pressing the MenuButton ` while the unit is in the Stop Mode.At the Setup menu, press the ¤ NavigationButton e until the Subtitle Language optionis highlighted.To change the default Subtitle Language, pressthe › Navigation Button e and note thatthe list of system defaults will be replaced witha list of the available options, as shown inFigure 3. The current subtitle language choicewill be indicated by a filled-in circle on the liston the right side of the screen.Figure 3To change the default setting, press the ⁄/ ¤Navigation Buttons e until the desiredchoice is highlighted, and then press the EnterButton d. Note that the circle for yourchoice will fill in, and the menu will return tothe default listings.If you wish to change the subtitle default to alanguage other than English, Spanish or French,press the ⁄/ ¤ Navigation Button e untilthe “Other” line on the bottom is highlighted.Consult the Language Codes list on page 30 forthe desired language. Press the Enter Buttond, and then enter the four-digit code fromthe list using the Numeric Keys o.Although your selection will be entered, theword “Other” will appear on the default list.Note that when a default subtitle language isselected, it will be used whenever that lan-guage is present on the DVD disc being played.However, when that language is not present,the language used will be the one prepro-grammed into the disc itself. (Typically, thatdefault will be English for discs sold inRegion 1, but the selection will vary at thediscretion of each disc’s producer.)Although the default will set the language thatwill be used when the disc is first put into play,the language may easily be changed at anytime by using the Subtitle Button . Seepage 25 for more information.If you have no other changes to make after set-ting this default, press the Menu Button `to remove the Setup Menu from the screen, orpress the Play Button g/@ to begin orresume playback.31Setup MenuDownloaded From Disc-Player.com Harman/Kardon Manuals