12 SETUP AND CONNECTIONSSetup and ConnectionsImportant Notes on SCART and RGBformat: Your DVD 25 is equipped with a SCART con-nector for direct connection to the TV. The SCART connector provides the videosignal as well as audio (stereo L/R) signals. The SCART connector for the TV provides thecomposite video signal or the direct RGB sig-nal, delivering the best video performancepossible, selectable in the Setup menu. Toview RGB video on your TV, the RGB compati-ble SCART connector on the TV must be usedand the DVD 25´s TV SCART connector mustbe set to ”RGB” (see page 16).Note that with RGB video the color intensitycannot be adjusted with most TVs. When the RGB video signal is used, DVD´srecorded with the NTSC format (with regionalcode 0 or 2) can be viewed even on non-NTSC compatible TVs.Component Video ConnectionIf the video display has component video inputs,connect the Component Video Outputs on theDVD 25 to the corresponding input jacks on yourtelevision. If you are using a progressive scantelevision or projector, you must also change theScan Type in the DVD player's Video Set-UpMenu from ”Interlaced” to ”Progressive.” Seepage 16.Connecting to a TV or monitor with SCART or Component connectorsVIDEO OUT/COMPONENTCLASS 1 LASER PRODUCTKLASSE 1 LASER PRODUKTLUOKAN 1 LASER LAITEKLASS 1 LASER APPARAT20 /60TV SCARTY / Y / GPb/ Cb/ BPr/ Cr/ RTV or MonitorTo power outlet(AC 230V/50 Hz)To SCART connectorTo ComponentconnectorsTo analog input ofstereo or Pro LogicAmplifier/ReceiverTo optical or coaxialinput of Dolby Digital/DTS Decoder/Amplifier/ReceiverDVD 25