Harman Kardon HARMAN/KARDON AVR 460 Owner's Manual

Also see for AVR 360: Function manual Owner's manual

Contents

Harman Kardon HARMAN/KARDON AVR 460 Owner's Manual Manual pdf 16 page image

16CONNECTIONSDigital audioThe AVR 460/AVR 360 is equipped with four HDMI (High-DefinitionMultimedia Interface) inputs, and one output. HDMI technology enablesdigital audio and video information to be carried using a single cable,delivering the highest quality picture and sound.The AVR 460/AVR 360 uses HDMI (V.1.3a with Deep Color) technology andis capable of processing both the audio and video components of the HDMIdata, minimizing the number of cable connections in your system. TheAVR 460/AVR 360 implements Deep Color, which increases by an order ofmagnitude the shades of color that can be displayed, and the latest losslessmultichannel audio formats, including Dolby TrueHD and DTS-HD MasterAudio.NOTE: Some DVD-Audio, SACD, Blu-ray Disc and HD-DVD players onlyoutput multichannel audio through their multichannel analog outputs.Make a separate analog audio connection in addition to the HDMIconnection, which is still used for video and to listen to Dolby Digital, DTSor PCM materials that may be stored on the disc.The AVR 460/AVR 360 converts analog video signals to the HDMI format,including its on-screen menus, upscaling to high-definition 1080p resolution.The HDMI connector is shaped for easy plug-in (see Figure 4). If your videodisplay has a DVI input and is HDCP-compliant, use an HDMI-to-DVI adapter(not included). A separate audio connection is required. HDMI cable runs arelimited to about 3 meter.Figure 4 – HDMI ConnectionIf your video display or source device is not HDMI-capable, use one of theanalog video connections (composite or component video) and a separateaudio connection.Coaxial digital audio jacks are usually color-coded in orange. Although theylook similar to analog jacks, you should not connect coaxial digital audiooutputs to analog inputs or vice versa. See Figure 5.CoaxialCoaxial digitalaudio cableFigure 5 – Coaxial Digital AudioOptical digital audio connectors are normally covered by a shutter to protectthem from dust. The shutter opens as the cable is inserted. Input connectorsare color-coded using a black shutter, while outputs use a gray shutter. SeeFigure 6.OpticalOptical digitalaudio cableFigure 6 – Optical Digital Audioanalog audioTwo-channel analog connections require two cables, one for the left channel(white) and one for the right channel (red). These two cables are oftenattached to each other. See Figure 7.For sources that are capable of both digital and analog audio, you may makeboth connections.The analog audio connection is required for multizone operation, as theAVR 460/AVR 360’s multizone system is not capable of converting a digitalsignal to analog format. Use the analog audio connections even with theSurround Back/Zone 2 speaker outputs, in case another 2-channel digitalaudio source is in use in the main listening area. The AVR 460/AVR 360 is onlycapable of processing one PCM source at a time.You may only record materials from DVDs or other copy-protected sourcesusing analog connections. Remember to comply with all copyright laws, ifyou choose to make a copy for your own personal use.Analog audiocable (RCA)LRFigure 7 – Analog AudioThe 6/8-Channel Inputs are multichannel analog connections that are usedwith high-definition sources that decode the copy-protected digital content,such as some DVD-Audio, SACD, Blu-ray Disc and HD-DVD players (See Figure8). The multichannel analog audio connection is not required for playerscompliant with HDMI version 1.1 or better, or that output linear PCM signalsvia an HDMI connection. Consult the owner’s guide for your disc player formore information.Multichannelanalog audiocable (RCA)Front Surround CenterWhite Blue GreenRed Gray PurpleSubwooferFigure 8 – Multichannel Analog AudioThe AVR 460/AVR 360 also includes a proprietary, dedicated audio connectionfor The Bridge III docking station for iPod or iPhone. If you own a dockingiPod (most models, 4G or later), iPhone or iPhone 3G, connect The Bridge IIIto The Bridge III port on the receiver. See Figure 9. Dock your iPod or iPhone(not included) in The Bridge III, and you may listen to your audio materialsthrough your high-performance audio system. You may view still imagesor video materials stored on a photo- or video-capable iPod that supportsvideo browsing, or an iPhone. Use the AVR 460/AVR 360 remote to controlthe device, with navigation messages displayed on the front panel and on avideo display connected to the AVR. The Bridge III outputs analog audio to theAVR 460/AVR 360, and is available to the multiroom system.Figure 9 – The Bridge III port