Harman Kardon HK 3380 Owner's Manual

Also see for HK 3380: Brochure Brochure Brochure & specs Brochure & specs Brochure & specs

Contents

Harman Kardon HK 3380 Owner's Manual Manual pdf 7 page image

FRONT-PANEL INFORMATION DISPLAYFRONT-PANEL INFORMATION DISPLAY 7F EGA BHIJKCSPEAKER 2SPEAKER 1 PHONOCDFMVID 1TAPE M.VID 2PRESETAM VID 3AUTO TUNED STEREOMUTESLEEPMEMORYDA Speaker Selection IndicatorsB Main Information DisplayC Preset Number/Sleep TimerD Input IndicatorsE Sleep IndicatorF Preset IndicatorG Memory IndicatorH Stereo IndicatorI Tuned IndicatorJ Auto IndicatorK Mute IndicatorA Speaker Selection Indicators: The dot to theleft of the indicator for each speaker pair will lightwhen that pair is active. Press the Speaker 1 5 orSpeaker 2 7 selectors to activate either or bothpairs of speakers.B Main Information Display: This display showsmessages relating to the status, input source, tuner orother aspects of the HK 3380’s operation.C Preset Number/Sleep Timer: When the tuner isin use, these numbers indicate the specific presetmemory location in use. (See page 15 for more infor-mation on preset stations.) When the Sleep function isin use, these numbers show how many minutesremain before the unit goes into the Standby mode.D Input Indicators: The dot to the left of the nameof the device that is currently the source input for theHK 3380 will light.When the device connected to the Tape MonitorInputs ¢ has been selected, the dot to the left ofthe Tape Monitor Input Indicator D will flash toindicate that you are hearing the signal the HK 3380is receiving from the device connected to the TapeMonitor Inputs ¢. The dot to the left of the InputIndicator D for the last-selected source input willremain lit. (See page 15 for more information onmonitoring tape recordings.)E Sleep Indicator: This indicator lights when theSleep function is in use. The numbers in the PresetNumber/Sleep Timer Indicators will show the minutesremaining before the HK 3380 goes into the Standbymode. (See page 14 for more information on theSleep function.)F Preset Indicator: This indicator lights when thetuner is in use to show that the Preset Number/Sleep Timer C is showing the station’s presetmemory number. (See page 15 for more informationon tuner presets.)G Memory Indicator: This indicator flashes whenentering presets and other information into the tuner’smemory.H Stereo Indicator: This indicator lights when an FMstation is being tuned in stereo.I Tuned Indicator: This indicator lights when a sta-tion is being received with sufficient signal strength toprovide acceptable listening quality.J Auto Indicator: This indicator lights when thetuner’s Auto Stereo mode is in use.K Mute Indicator: This indicator flashes to remindyou that the HK 3380’s output has been silenced bypressing the Mute Button 4 ®. Press the Mutebutton again to return to the previously selectedoutput level.NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this productat www.harmankardon.com.NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this productat www.harmankardon.com.