Harman Kardon HK3480 Owner's Manual

Also see for HK 3480: Brochure Brochure Brochure Brochure & specs Brochure & specs

Contents

Harman Kardon HK3480 Owner's Manual Manual pdf 8 page image

REAR-PANEL CONNECTIONS8 REAR-PANEL CONNECTIONS120 2803480U.S. Patent Nos. 4,893,342, 4,910,779, 4,975,954, 5,034,983,5,136,651, and 5,333,200 Cooper Bauck Transaural Stereo.‚⁄∞§ •¶ ª¢™£¡¤‹fl°·b a ‡fi›¡ Phono Ground™ Phono Inputs£ CD Audio Inputs¢ Tape Monitor Play/In∞ Tape Monitor Record/Out§ Video 1 Audio/Video Play/In¶ Video 1 Audio/Video Record/Out• Video 2 Audio/Video Inputsª Video 3 Audio/Video Inputs‚ Preamp Out⁄ Main In¤ Subwoofer Out‹ Speaker 1 Terminals› Speaker 2 Terminalsfi Accessory Outletsfl Power Cable‡ Remote IR Out° Remote IR In· Video Monitor Outputa AM Antennab FM Antenna¡ Phono Ground: Connect the ground wire froma turntable to this terminal to reduce system hum.™ Phono Inputs: Connect the outputs of yourturntable or tonearm to these jacks. Only MovingMagnet (MM)-type cartridges may be used.£ CD Audio Inputs: Connect these jacks to theoutput of a compact disc player or CD changer.¢ Tape Monitor Play/In: Connect these jacks tothe Play/Out jacks of an audio recorder.∞ Tape Monitor Record/Out: Connect these jacksto the Rec/In jacks of an audio recorder.NOTE: When these jacks are connected to a three-head recorder or another device with off-head play-back, it will be possible to monitor the source beingrecorded.§ Video 1 Audio/Video Play/In: Connect thesejacks to the PLAY/OUT jacks of an audio or videodevice, such as a VCR or DVD player. In order toview the video signal of a video device connectedto this input, remember to connect the Video MonitorOutput · to the video input of your TV or videodisplay.¶ Video 1 Audio/Video Record/Out: Connectthese jacks to the Rec/In jacks of an audio or videorecorder.• Video 2 Audio/Video Inputs: Connect thesejacks to the PLAY/OUT jacks of an audio or videodevice, such as a VCR or DVD player. In order toview the video signal of a video device connectedto this input, remember to connect the Video MonitorOutput · to the video input of your TV or videodisplay.ª Video 3 Audio/Video Inputs: Connect thesejacks to the PLAY/OUT jacks of an audio or videodevice, such as a VCR or DVD player. In order toview the video signal of a video device connectedto this input, remember to connect the Video MonitorOutput · to the video input of your TV or videodisplay.‚ Preamp Out: These jacks provide an output forthe left and right channels to an optional externalamplifier. In normal operation, unless an externalpower amplifier is used, the jumper pins shouldremain connected between these jacks and theMain In Jacks ⁄.⁄ Main In: These jacks are the input to the HK 3480’spower amplifier. Unless an external power amplifier is used,the jumper pins should remain connected between thesejacks and the Preamp Out Jacks ‚.NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this productat www.harmankardon.com.