ENGLISH5Indicators and Remote ControlHK 650/690PHONOTAPE 2VID 2INDEPENDENT REMOTECONTROLThe keys on the remote control unitfunction the same as the correspondingbuttons on the amplifier itself.The remote control unit also includesmany keys that allow for easy control ofcompatible Harman/Kardon cassettetape deck, CD player and tuner.Please refer to the owner's manual foreach unit for operating instructions.Some of these units must be connectedto the amplifier's remote control outputjacks so that the system remote controlcan operate them.OPERATING CONDITIONSThe control unit operates effectivelywithin a distance of 7 meters and anangle of 30° from the amplifier. Using thecontrol near fluorescent lights mayshorten this range, as will any dust or dirtthat accumulates on the front of theremote control, or the remote sensorarea of the amplifier. Also avoid blockingthe line of sight between amplifier andremote.The control unit is powered by two AAbatteries, included with your amplifier.When you replace weak batteries,replace both at the same time. When theremote is to be unused for an extendedperiod, remove the batteries to preventdamage from corrosion.LED Power Mode indicationRed = Standby or protectionGreen = ONRemote SensorIndicates that Tape 2 has beenselected. In this case, only theoutput of the tape deck connectedto the TAPE 2 jacks can be heard.Indicates which sourceis selected.