Harman Kardon SIGNATURE 2.1 Owner's Manual

Contents

Harman Kardon SIGNATURE 2.1 Owner's Manual Manual pdf 6 page image

Front and Rear Panels4Signature 2.1¡ Speaker Outputs: Connections from these terminalsshould be made to the appropriate speakers in yoursystem.™ Audio Inputs: Connect the outputs of theSignature 2.0, or other surround processor, preamplifieror decoder to these jacks.£ AC Power Cord: Connect this plug to a wall-mounted AC outlet. Due to the current draw of theSignature 2.1, it is NOT recommended that the accessoryoutlets on the back of the audio/video components beused to power this product.¢ Power Amp Trigger In: Connect this jack to thematching trigger output on a Signature 2.0 or othercompatible device to have the 2.1 automatically turn onwhen the device is activated. See page 5 for additionaldetails.CHANNEL FIVE (FRONT LEFT)4 Ω MIN.SPEAKERIN5AC INPUTPOWER AMPTRIGGER INCHANNEL FOUR (SURROUND LEFT)4 Ω MIN.SPEAKERINAC 12OV/60Hz 950WCHANNEL THREE (FRONT CENTER)4 Ω MIN.SPEAKERIN3 4CHANNEL TWO (SURROUND RIGHT)4 Ω MIN.SPEAKERIN2CHANNEL ONE (FRONT RIGHT)SPEAKERIN14 Ω MIN.£ ¢™¡Rear Panel ConnectionsOn/Off1 2 3Front Panel Controls1 Power Switch: Press this switch to turn the 2.1 onfor manual operation, or to place it in the Standby modefor automatic/remote turn-on when the 2.1 is connectedto a device with a compatible trigger circuit.2 Power On Indicator: When the word SIGNATURE isilluminated in blue, the 2.1 is in a normal operatingcondition.3 LED Indicator: The color of this indicator varieswith the status of the 2.1. It is red when the unit is offand in manual operation, amber in the standby mode,and flashing green during warm-up. If the indicatorflashes and alternates between red and amber, the 2.1is in the protect mode, indicating a problem in the unitor connections to the speakers.