Harman Kardon TU-940 Technical Manual

Contents

Harman Kardon TU-940 Technical Manual Manual pdf 4 page image

CONTROL AND FUNCTIONS1. POWERPress to turn the unit on. The ring around the button will glow green. Press again to turn the unitoff. The ring will glow red and the word “STANDBY” will appear in the display.2. NUMBERIC KEYSUse to select the preset number of a station that has been entered into the preset memories orto store a station in the memory in conjunction with MEMORY 7.To recall a previously programmed station, press the appropriate numeric button(s). For singledigit numbers (1-9), press the number and the station will be tuned at once or in a few seconds.To recall preset locations 10 though 30, press the desired buttons in order and the station will betuned at once.To use the buttons to enter a station to the preset memory, see page 10.3. FLUORESCENT DISPLAYThe display panel contains a large display for station frequency information and RDS data, aswell as status indicators for various tuner functions and 5-step RF level indicator bars.4. BANDPress to change between FM and AM frequency bands..5. IF BAND (FM TUNING ONLY)Press to change the passband of the intermediate frequency to compensate for interferenceform adjacent station.NARROE: When reception is disturbed by interference from other stations, press untilNARROW is lit. This improves reception.NORMAL: For normal reception, press until NORMAL is lit.6. DISPLAY MODEPress to change between bright and dim display lighting or display off.LOCAL DX RDS PTY RT CT TA EON TUNED STEREOMONO TUNINGPRESETRF LEVELSTANDBYWIDENARROWCLOCKTIMERON OFFSLEEPAUTOMEMORYSCANPower1 2 3 4 56 7 8 9 0BandAuto/ManIF Band DisplayModeMemoryTU 940 RDSTune/Pst Pst ScanRemote sensor Display PTYDirect CharacterTuningRF Mode FM Mode4 5 6 7 8 910111214131516173214