Harmar Mobility HELIX Installation & Service Manual

Also see for HELIX: Owner's manual Owner's manual

Contents

Harmar Mobility HELIX Installation & Service Manual Manual pdf 14 page image

| www.harmar.com | 800-833-047814 © 2018 Harmar Mobility, LLC • All Rights ReservedFinal ChecksBefore putting the lift into operation for the user verify the following:• Check all stops (top, middle & bottom)• Foot rest (Both direction of travel)• Rail obstruction-both directions• Rail (all hardware and mounting hardware are tight)• Final limit (both ends of travel)• Seat swivel (lift won't run if seat is swiveled)• Check all clearances to ensure there are no pinch points• Provide the Owner’s Manual and review the lift’s operation and stops with the customer.• Charge for 12 hours after testing is complete.• Test wireless remote (in both direction of travel)• Seat postion, level at top and bottom. If it is not level or customer would like the chair to have a slightuphill tilt, adjust with the leveling joint.- Loosen set screw (2.5 mm)- Remove screw (6mm)- Adjust joint in or out depending on which direction you want the chair to go- Retighten allThe lift is now ready to use. Remember to leave the Owner’s Manual with the end-user and answer anyquestions they may have on the use of the Curved Stair Lift.FINAL CHECKS