Hartke Kickback KB12 Owner's Manual

Also see for Kickback KB12: Owner's manual

Contents

Hartke Kickback KB12 Owner's Manual Manual pdf 2 page image

2Important Safety InformationWARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.This lightning flash with arrowhead symbol within an equilateral triangleis intended to alert the user to the presence of non-insulated “dangerousvoltage” within the product’s enclosure that may be of sufficient magni-tude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alertthe user to the presence of important operating and maintenance in-structions in the literature accompanying the appliance.ATTENTIONRISQUE DE CHOC ÉLECTRONIQUE -NE PAS OUVRIRIf you want to dispose this product, do not mix it with general household waste. There is aseparate collection system for used electronic products in accordance with legislation thatrequires proper treatment, recovery and recycling.Private household in the 28 member states of the EU, in Switzerland and Norway may re-turn their used electronic products free of charge to designated collection facilities or to aretailer (if you purchase a similar new one).For Countries not mentioned above, please contact your local authorities for a correct method ofdisposal.By doing so you will ensure that your disposed product undergoes the necessary treatment, recoveryand recycling and thus prevent potential negative effects on the environment and human health.EMC NoticeKickback KB12 and Kickback KB15 are Active Speakers for professional use, they can be used infollowing electromagnetic environment: residential, commercial and light industrial, urban outdoors.They are the apparatus Not intended for rack mounting.• For the Kickback Amplifier, the peak inrush current equals to 4.1A.FCC NoticeThis device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-tions: (1)this device may not cause harmful interference,and (2)this device must accept any interfer-ence received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-tection against harmful interference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for help.