112.6 Daisy Chain Connection2.6.1 Bus Layer Daisy Chain MethodUse one end of daisy chain cable to connect to the Daisy Chain port of Master KVM switch andconnect the other end of daisy chain cable to the Local Console port of the next Slave KVM switch.Repeat the connection procedure for the next Slave KVM switch. You can daisy chain up to amaximum of eight (8) banks.Please Note: The Daisy Chain cable is NOT supplied with the KVM switch. Please contact yourreseller to purchase separately. This daisy chain cable has all 15 pins fully connected.Many VGA cables do not have all 15 pins connected and may not be suitable.Figure 9. Daisy Chain ConnectionBank 1 (Master)Bank 2 (Slave 1)Bank 3 (Slave 2)8 / 16 Port KVM Switch