I-Tech MC1132 User Manual

Contents

I-Tech MC1132 User Manual Manual pdf 10 page image

< 1.4 > IP console setting Matrix Cat6 IP KVMAfter the cable connection, please take the following steps to configure the IP KVM1. Download IPKVMsetup.exe2. Double click IPKVMsetup.exe to configure the IP KVM by device setup as below.> Device SetupDeviceDevice MAC address : C3:EE:03:00:00:7ERefresh DevicesDevice Type□ Enable WLAN Configuiation (WLAN Devices only)Network ConfigurationIP auto configurationNetwork ConfigurationIP auto configuration None -IP address 192.168.1.22Subnet maskGateway255.255.255.0Subnet maskGateway 0.0.0.0Subnet maskGatewayAuthenticationSuper user loginSuper user passwordNew super user passwordNew password (confirm)Super user loginSuper user passwordNew super user passwordNew password (confirm)LzSuper user loginSuper user passwordNew super user passwordNew password (confirm)Super user loginSuper user passwordNew super user passwordNew password (confirm)Wireless LAN ConfigurationWitelessLANESSID |Wireless LAN WEF KeiEnable V/cP encryptionQuery Device Setup DeviceOK Cancel HelpStatus: Ready.3. Click Refresh Device to search the connected IP KVM4. Select the M.A.C. address, which you want to setup, then click Query Device5. Enter Super user login. The default is super6. Enter Super user password. The default is pass7. Enter the new super user password8. Re-enter the new password9. Change the desired IP address / Subnet mask / Gateway, then click Setup Device to confirm the setting to IP KVM10. The default address is as below:-■ The single IP KVM model, such as MC1132 -http://192.168.L22■ The dual IP KVM model, such as MC2132 - http://192.168.1.22 (for 1st IP)http://192.168.1.23 (for 2nd IP)11. Open Internet Explorer (I.E. ), version 6.0 or above12. Enter the IP KVM address into the address bar-For Single IP-http://192.168.l22- For Dual IP - http://192.168.L22 (for 1st IP )http://192.168.L23 ( for 2nd IP )13. Enter username ( default is super)Password ( default is pass )Authenticate Username and Password !UsernamePassword14. After successful login to IP KVM, the user will enter the main page of IP KVM£k The setting is enough for intranet.If the users access KVM GUI via internet, please ask MIS for assistance anddownload IP KVM user manualP.5