6. Turning the System on and OperationAfter the mortar or adhesive solution has dried up (seecorresponding application instructions), you can turn onthe I-WARM floor heating system. Turn the thermostat onand set desirable heating level (see the thermostat certificate instructions). After the floor heating system hasbeen installed, for the first time you can set a maximumheating level. This will quicken floor heatingup. When thecomfort temperature has been reached, you can turn theheating down to the desirable level.For the first time the "warm floor" feeling may notappear until after some time.It is especially applicable to newly built premises without turned on heating. Do not worry and let the systemfully warm up the room.7. Advices and NotesThanks to automatic temperature regulation, I-WARMsystem uses as much power as it is necessary to reach adesirable thermal comfort level. Installed in each roomthermostats regulate heating process independently,which contributes to energy savings.www.iwarm.comSpooled Underfloor Heating Kit27