IAI ROBO Cylinder RA4C Operating Manual

Also see for ROBO Cylinder RA4C: Operating manual

Contents

IAI ROBO Cylinder RA4C Operating Manual Manual pdf 11 page image

11. ForewordThank you for purchasing an IAI product.This manual explains the structure, correct operation and maintenance of the actuator.Please read this manual carefully before using the product.For more complete information on operating the actuator, please also refer to the controller operatingmanual.2. Safety Precautions2.1 Basic Operating Instructions• Please do not attempt to use or operate the actuator in any manner not indicated in this manual or thecontroller manual.• Please be sure to use only the cable provided by IAI to connect the actuator and controller.• Please do not allow people within the moving range of the unit when it is in operation or when thepower is ON since this is dangerous.2.2 Maintenance and Inspection• When doing maintenance and inspection work, always shut down the controller power first.• When doing inspection, make sure that no one can inadvertently turn the power ON.• Make sure that a sign indicating work in progress is clearly visible.• If several persons are working, be sure to watch out for each other's safety. In particular, check beforeturning power ON or OFF and let others know if you are doing work involving axis movement.(Note)• The content of this manual is subject to change without notice for the purpose of improvement.• This manual was created with utmost attention to accuracy. Should you find any error, however, or ifyou have any question, please contact IAI’s Sales Engineering or Technical Service Section.