IBM 21L4365 User Manual

Contents

IBM 21L4365 User Manual Manual pdf 20 page image

13DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARRManual SetupNormally, you can complete the setup procedure using AUTO S ETUP, however,if your screen image is still distorted after you perform AUTO SETUP or the setupdiskette does not run on your system, perform MANUAL SETUP.If the monitor is in standbymode (STANDBY ON), itmight automatically turn offwhile you are waiting for it towarm up.To disable the Windows energysaving feature by clicking on theS TART button and selectingS ETTINGS , C ONTROL P ANEL ,D ISPLAY , SCREEN S AVER. Makesure that the E NERGY SAVINGFEATURES OF MONITOR checkboxes are either empty, or thatthe features are set to at least 20minutes.Your system may also have itsPower Saving utility enabledthrough the Bios Setup Utility.Refer to your system manual fordirections on disabling that biosoption.1. Have your computer and monitor turned on for at least 15 minutes untilthe monitor and video adapter have warmed up.2. You may wish to start the program you most often use so that you canadjust for a “typical” screen.3. Press the OSD Enter button at the bottom of the monitor to displaythe initial OSD menu.4. Use an Arrow button ( - or + ) to select the IMAGE LOCK icon andpress the OSD Enter button to access the function.5. Using an Arrow button ( - or + ), select MANUAL , press and thenpress once to select COARSE. Left and right arrow adjustmentindicators become illuminated (see page 17 ).6. Use the Arrow buttons to correct (as much as possible) for noise in thevideo signal then press to save the changes.7. Use an Arrow button to select FINE and press the button.8. Use the Arrow buttons again to tune the image to your liking.9. When finished, press the Exit button four times to exit from the OSD.You have completed the monitor setup.