· 4.1.84.1.9Make sure that the terminator switch on the workstation immediately before yours is set to 2. SeeAppendix A for the locations of the terminator switches.Will the communication cable (the cable that connects to the system or the remote workstationcontroller) be connected to a 5294 Control Unit?5294 CONTROLUNITCOMMUNICATIONCABLEOTHERWORKSTATIONSYOUR DISPLAYSTATION.......______________ Example Only ______________~YES•Go to step 4.1.14.NO•Make sure thecommunication cable isconnected to the hostsystem, then go to step4.1.10.4.1.10 Do the following .1. Connect the 3196 power cord to a grounded electrical outlet.2. Set the 3196 power switch to on (I).38 IBM 3196 Setup

IBM 3196 Setup Instructions