IBM 6029 Hardware Maintenance Manual

Also see for NetVista 6029: User guide

2. Install the adapter into the appropriate slot on the system board.3. Unscrew the adapter from the chassis.4. Lift adapter out of PCI slot.Installing and removing internal drivesThis section provides information and instructions for installing and removinginternal drives.Internal drives are devices that the computer uses to read and store data. You canadd drives to the computer to increase storage capacity and to enable the computerto read other types of media. Some of the different drives that are available are:v Hard disk drivesv CD drives or DVD drivesv Removable media drivesInternal drives are installed in bays. In this book, the bays are referred to as bay 1,bay 2, and so on.When installing an internal drive, it is important to note what type and size ofdrive that can be installed in each bay. Also, it is important to correctly connect theinternal drive cables to the installed drive.Drive specificationsType 6029 computers come with the following IBM-installed drives:v A CD-ROM, DVD-ROM, or CD-RW drive in bay 1 (some models)v A 3.5-inch diskette disk drive in bay 3v A 3.5-inch hard drive in bay 4Any bay that does not have a drive installed has a static shield and bay panelinstalled.The following illustration shows the locations of the drive bays.Chapter 5. Installing Options 29