IBM Aptiva 2140 Hardware Maintenance Service

Also see for Aptiva 2140: Maintenance service manual Hardware maintenance service

Table 2-1 (Page 20 of 23). POST and Diagnostics and Utilities Indexfor Symptoms, Messages, Error Codes, or BeepsSymptoms, Messages, ErrorCodes, or BeepsAction/FRU11XX - Serial port test errors notlisted above.Test using a wrap plug while runningDiagnostics and Utilities.“Diagnostics and Utilities Device PresenceTest” on page 2-43.Serial adapter card, if installedSystem BoardOn the system board:1780/1790 - Hard Disk Drive 01781/1791 - Hard Disk Drive 11782/1792 - Hard Disk Drive 2 orCD/DVD-ROM drive1783/1793 - Hard Disk Drive 3 orCD/DVD-ROM driveif Hard Disk Drive 2installedHard disk drive connection/cable/jumpers.If an upgrade processor is installed, checkthat the proper speed has been set(switches and Setup Utility). Speed shouldbe a multiple of the original processorspeed.Hard disk drive size set correctly in SetupUtility.Hard disk driveSystem Board17XX - Hard disk drive error.(All 17XX errors not listed above)“Factory-Installed Drive Devices” onpage 2-47.Hard disk drive jumpersHard disk drive connection/cableHard disk driveSystem BoardPower Supply1800 - PCI Error (IRQ notavailable).A PCI adapter card has requested ahardware interrupt that is not available.1. Choose ISA Legacy Resources fromthe Setup Utility main menu, and makesure the interrupt resources (IRQ)setting for ISA legacy adapter cardsare correct. If the interrupt resourcessettings are not correct, change thesettings. See “Using the Setup Utility”on page 1-18.2. If all interrupts are being used by ISAlegacy adapter cards, you might needto remove an ISA card to makememory available to the PCI adaptercard.2-30Get user manuals: See SafeManuals.com