Argecy Computer Corporation 248-324-18007427 Solving print quality problemsIf the suggested corrective action does not fix the problem, call your service representative.Problem ActionPrint is too light. • The toner may be low. To utilize the remaining toner, remove the cartridge bygripping the handles with both hands. With the cartridge arrows pointingdownward, shake the print cartridge back and forth. Reinstall the cartridgeand then press Go.• Change the Toner Darkness setting in the Quality Menu.• If you are printing on an uneven print surface, change the Paper Weight andPaper Texture settings in the Paper Menu. See Paper Type.• Verify that the correct print material is being used.Toner smears or print comesoff the page.• If you are printing on an uneven print surface, change the Paper Weight andPaper Texture settings in the Paper Menu. See Paper Type.• Verify that the print material is within the printer specifications. See Printmaterial specifications for more details.• If the problem continues, call a service technician.Toner appears on the back ofthe printed page.Toner is on the transfer roll. To help prevent this, do not load print material that issmaller than the page size of the job to be printed.Open and close the printer upper front door to run the printer setup cycle andclean the transfer roll.
