IBM NETVISTA 2251 Hardware Maintenance Manual

Also see for NetVista: Hardware Maintenance Manual Hardware Maintenance Manual Hardware maintenance guide Hardware Maintenance Manual Hardware maintenance guide

Contents

Diagnostic Error Code FRU/Action005-197-XXXVideo test warning 1. Make sure the component that is calledout is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test005-198-XXXVideo test aborted 1. If a component is called out, make sureit is connected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″section005-199-XXXVideo test failed, cause unknown 1. Go to the ″Undetermined problems″section2. Flash the system and re-test3. Replace component under function test005-2XX-XXX005-3XX-XXXVideo subsystem error1. Video card, if installed2. System board006-000-XXXDiskette interface Test Passed 1. No action006-0XX-XXXDiskette interface error 1. Diskette drive Cable2. Diskette drive3. System board006-195-XXXDiskette interface Test aborted by user 1. Information2. Re-start the test, if necessary006-196-XXXDiskette interface test halt, error thresholdexceeded1. Press F3 to review the log file2. Re-start the test to reset the log file006-197-XXXDiskette interface test warning 1. If a component is called out, make sureit is connected and/or enabled2. Re-run test3. Component that is called out in warningstatement4. Component under test006-198-XXXDiskette interface test aborted 1. If a component is called out, make sureit is connected and/or enabled2. Flash the system and re-test3. Go to the ″Undetermined problems″section006-199-XXXDiskette interface test failed, cause unknown 1. Go to the ″Undetermined problems″section2. Flash the system and re-test3. Replace component under function test006-25X-XXXDiskette interface Error 1. Diskette drive cable2. Diskette drive3. System boardChapter 6. Symptom-to-FRU Index 47