IBM PC 300GL Technical Information Manual

Also see for PC 300GL Type 6267: User guide

Chapter 4. Power SupplyComponent OutputsThe power supply provides separate voltage sources for the system board and internal storage devices.The following figures show the approximate power that is provided for specific system components. Manycomponents draw less current than the maximum shown.Note: For each PCI or ISA connector, the maximum power consumption is rated at 10 watts for +5 V DCand +3.3 V DC combined. Typical power budget assumptions use 7.5 watts per adapter. Ifmaximum power is used, then the overall system configuration will be limited in performance.Figure 14. System BoardSupply Voltage Maximum Current Regulation Limits+3.3 V DC 3000 mA +5.0% to −5.0%+5.0 V DC 4000 mA +5.0% to −4.0%+12.0 V DC 25.0 mA +5.0% to −5.0%−12.0 V DC 25.0 mA +10.0% to −9.0%Figure 15. Keyboard PortSupply Voltage Maximum Current Regulation Limits+5.0 V DC 275 mA +5.0% to −4.0%Figure 16. Auxiliary Device PortSupply Voltage Maximum Current Regulation Limits+5.0 V DC 300 mA +5.0% to −4.0%Figure 17. ISA-Bus Adapters (Per Slot)Supply Voltage Maximum Current Regulation Limits+5.0 V DC 2000 mA +5.0% to −4.0%−5.0 V DC 200 mA +5.0% to −5.0%+12.0 V DC 1500 mA +5.0% to −5.0%−12.0 V DC 300 mA +10.0% to −9.0%Figure 18. PCI-Bus Adapters (Per Slot) either/orSupply Voltage Maximum Current Regulation Limits+5.0 V DC 2000 mA +5.0% to −4.0%+3.3 V DC 3030 mA +5.0% to −4.0%Figure 19. USB PortSupply Voltage Maximum Current Regulation Limits+5.0 V DC 500 mA +5.0% to −4.0%Chapter 4. Power Supply 19