IBM RS/6000 7043 43P Series Setup Instructions

Also see for RS/6000 7043 43P Series: Supplemental service manual User guide User guide Service guide

Step 15: Are You Using an Ethernet Connection?Ask your system administrator if you are not sure. If you are not using Ethernet, goto “Step 18: Attach the Vertical Stand” on page 10. To connect the Ethernet cable: For Twisted-Pair (10 Base T for Model 140 and Model 240, 100/10 Base T forModel 150), go to “Step 16: Connect Twisted-Pair Ethernet” on page 8. For Thick (10 Base 5 for Model 140 and Model 240, 100/10 Base 5 for Model150), go to “Step 17: Connect Thick Ethernet” on page 9. For Thin (10 Base 2 for Model 140 and Model 240, 100/10 Base 2 for Model150), connect the Thin cable to the optional Transceiver (10 Base 2 for Model140 and Model 240, 100/10 Base 2 for Model 150), then go to “Step 17: ConnectThick Ethernet” on page 9Step 16: Connect Twisted-Pair EthernetNote: The twisted-pair connector is compatible with the IEEE 802.3 Ethernetnetwork (10 Base T link enabled for Model 140 and Model 240, 100/10 BaseT link enabled for Model 150). Connect the twisted-pair cable to the Twisted-Pair connector. The twisted-pair Ethernet cable is now installed; go to “Step 18: Attach theVertical Stand” on page 10.8 Setup Guide