IBM System x3250 M3 Type 4251 Installation And User Manual

Also see for System x3250 M3 Type 4251: Installation and user guide Specifications Datasheet Installation and user guide Product guide

Contents

v System InformationSelect this choice to view information about the server. When you make changesthrough other choices in the Setup utility, some of those changes are reflected inthe system information; you cannot change settings directly in the systeminformation. This choice is on the full Setup utility menu only.– System SummarySelect this choice to view configuration information, including the ID, speed,and cache size of the microprocessor, machine type and model of the server,the serial number, the system UUID, and the amount of installed memory.When you make configuration changes through other options in the Setuputility, the changes are reflected in the system summary; you cannot changesettings directly in the system summary.– Product DataSelect this choice to view the system-board identifier, the revision level orissue date of the firmware, the integrated management module anddiagnostics code, and the version and date.This choice is on the full Setup utility menu only.v System SettingsSelect this choice to view or change the server component settings.– ProcessorsSelect this choice to view or change the processor settings.– MemorySelect this choice to view or change the memory settings.– Devices and I/O PortsSelect this choice to view or change assignments for devices and input/output(I/O) ports. You can configure the serial ports; configure remote consoleredirection; enable or disable integrated Ethernet controllers. If you disable adevice, it cannot be configured, and the operating system will not be able todetect it (this is equivalent to disconnecting the device).– PowerSelect this choice to set the operating mode if a power loss occurs.– Operating ModesSelect this choice to view or change the operating profile (performance andpower utilization).– Legacy SupportSelect this choice to view or set legacy support.- Force Legacy Video on BootSelect this choice to force INT video support, if the operating system doesnot support UEFI video output standards.- Rehook INT 19hSelect this choice to enable or disable devices from taking control of theboot process. The default is Disable.- Legacy Thunk SupportSelect this choice to enable or disable UEFI to interact with PCI massstorage devices that are non-UEFI compliant.– Integrated Management ModuleSelect this choice to view or change the settings for the integratedmanagement module.- POST Watchdog TimerChapter 3. Configuring the server 59