Table 10. Server configuration and applications for configuring and managing RAID arraysServer configurationRAID array configuration(before operating system isinstalled)RAID array management(after operating system isinstalled)ServeRAID-M1115 adapter MegaRAID BIOSConfiguration Utility (pressCtrl+H to start), pre-boot CLI(press Ctrl+P to start),ServerGuide, HIIMegaRAID Storage Manager(MSM), MegaCLI (CommandLine Interface), and IBMDirectorServeRAID-M5110 adapter MegaRAID BIOSConfiguration Utility (pressCtrl+H to start), pre-boot CLI(press Ctrl+P to start),ServerGuide, HIIMegaRAID Storage Manager(MSM), MegaCLI, and IBMDirectorServeRAID-M5120 adapter MegaRAID BIOSConfiguration Utility (pressCtrl+H to start), pre-boot CLI(press Ctrl+P to start),ServerGuide, HIIMegaRAID Storage Manager(MSM), MegaCLI, and IBMDirectorNotes:1. For more information about the Human Interface Infrastructure (HII) andSAS2IRCU, go to http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5088601.2. For more information about the MegaRAID, go to http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5073015.Note: Do not install the ServeRAID M5120 SAS/SATA adapter in slot 4, 7, and 8for proper cooling.Using the ServerGuide Setup and Installation CDThe ServerGuide Setup and Installation CD provides software setup tools andinstallation tools that are designed for your server. The ServerGuide programdetects the server model and hardware options that are installed and uses thatinformation during setup to configure the hardware. Use this CD during the initialinstallation of the server to simplify the operating-system installations by providingupdated device drivers and, in some cases, installing them automatically. Todownload the CD, go to http://www.ibm.com/support/entry/portal/docdisplay?lndocid=SERV-GUIDE and click IBM Service and Support Site.Note: Changes are made periodically to the IBM website. The actual proceduremight vary slightly from what is described in this document.To start the ServerGuide Setup and Installation CD, complete the following steps:1. Insert the CD, and restart the server. If the CD does not start, see “ServerGuideProblems” in the Problem Determination and Service Guide on the System xDocumentation CD.2. Follow the instructions on the screen to:a. Select your language.b. Select your keyboard layout and country.c. View the overview to learn about ServerGuide features.118 IBM System x3500 M4 Type 7383: Installation and User’s Guide
