IBM T200 Ultrium Setup, Operator, And Service Manual

Also see for Ultrium 3580: Product guide Reference guide

Attention NoticeAn attention notice indicates the possibility of damage to a program, device, orsystem, or to data. An exclamation point symbol may accompany an attentionnotice, but is not required. Sample attention notices follow:Attention: If you use a power screwdriver to perform thisprocedure it could destroy the tape.Attention: Do not operate the 3580 Tape Drive in a poor air-quality environment.Performing the Safety Inspection ProcedureBefore you service the 3580 Tape Drive, perform the following safety inspectionprocedure:1. Stop all activity on the SCSI bus.2. Turn off the power to the tape drive.3. Disconnect the SCSI cable and check the SCSI bus terminator for damage.4. Unplug the tape drive’s power cord from the electrical outlet.5. Check the tape drive’s power cord for damage, such as a pinched, cut, orfrayed cord.6. Check the tape drive’s SCSI bus (signal) cable for damage.7. Check the cover of the tape drive for sharp edges, damage, or alterations thatexpose its internal parts.8. Check the cover of the tape drive for proper fit. It should be in place andsecure.9. Check the product label on the bottom of the tape drive to make sure that itmatches the voltage at your outlet.End of Life (EOL) PlanThis box is a purchased unit. Therefore, it is the sole responsibility of the purchaserto dispose of it in accordance with local laws and regulations at the time ofdisposal.This unit contains recyclable materials. The materials should be recycled wherefacilities are available and according to local regulations. In some areas IBM mayprovide a product take-back program that ensures proper handling of the product.For more information, contact your IBM representative.Safety and Environmental Notices xiii