IBM T750 User Manual

Also see for T750: Manual 

IBM T750 User Manual Manual pdf 16 page image

14Auto Setup for DOSIf the monitor is in standbymode (STANDBY ON), itmay automatically turn off whileyou are waiting for it to warm up.If this happens, switch off themonitor and switch it on againafter a few seconds.1. Turn on the monitor first; then turn on the computer.If the message CHECK SIGNAL CABLE is displayed, or if nothing isdisplayed, check:• that the video interface cable is connected properly.• the correct video adapter card is installed.• the correct supported display mode is selected for your computer.If you are using PC-DOS/V, change to U.S. mode bytyping ‘CHEV US’ and pressingENTER at the commandprompt.2. Wait approximately 15 minutes, until the monitor warms up.3. Insert the User’s Guide and Installation Files CD into the computer CD-ROM drive.4. Display the command prompt screen of the DOS full-screen display.5. Type d:\ (change the drive letter to match your CD-ROM drive if it is notdrive D).6. Type TESTPATD and press ENTER.7. Select from the screen the number for the color or text mode you want toset up.8. Select from the screen the number for the video mode you want to setup. You can repeat this process for as many of the color and videomodes as you need.The size and diversity ofthe dot pattern varies withthe screen resolution.9. When the dot pattern appears, press the OSD Enter button at thebottom of the monitor to display the initial OSD menu.10. Use an Arrow button ( or ) to select the IMAGE LOCK iconthen press the OSD Enter button to access the function.11. Using an Arrow button ( or ), select AUTOMATIC and press theOSD Enter button . This activates the AUTO SETUP procedure, whichwill optimize the display settings with the provided dot-patterns.The screen will flash off several times and you might notice smallchanges to the test pattern.12. When finished, the OSD main menu returns. Press the Exit buttonto exit from the OSD.13. Press the ESCAPE key to exit the test pattern program.14. Type Exit at the command prompt to return to Windows.If you use other operating systems, perform the appropriate Auto Setup forthose systems using instructions given in "Auto Setup for Windows 3.1,Windows 95, Windows 98, Windows NT, Windows 2000, Windows Me orWindows XP on page 15”.T750_E.fm Page 14 Monday, June 3, 2002 3:05 PM