IBM ThinkCentre 8105 Hardware Replacement Manual

Contents

5. Position the replacement memory module over the memory connector. Makesure that the notch 1on the memory module aligns correctly with theconnector key2 on the system board. Push the memory module straightdown into the memory connector until the retaining clips close.6. Go to “Completing the parts replacement” on page 26.Replacing a PCI adapterAttentionDo not open your computer or attempt any repair before reading the “Important safetyinformation” in the Quick Reference that was included with your computer or in theHardware Maintenance Manual (HMM) for the computer. To obtain copies of the QuickReference or HMM, go to http://www.ibm.com/pc/support/.This section provides instructions on how to replace a PCI adapter.1. Open the computer cover. See “Opening the cover” on page 5.2. Pivot the drive bay assembly upward to gain access to the system board.3. Locate the cable clip. See “Locating components” on page 3.4. Remove all cables from the cable clip attached to the PCI riser.22 Hardware Replacement Guide