v Follow the suggested actions in the order in which they are listed in the Action column until the problemis solved.v See Chapter 4, “Parts listing, System x3200 M3 Types 7327 and 7328,” on page 133 to determine whichcomponents are customer replaceable units (CRU) and which components are field replaceable units(FRU).v If an action step is preceded by “(Trained service technician only),” that step must be performed only by atrained service technician.Fault in slot System board onsystem %1.(%1 = CIM_ComputerSystem.ElementName)Error 1. Check the extender-cardLEDs.2. Reseat the affected adaptersand extender card.3. Update the server and adapterfirmware (UEFI and IMM).Important: Some clustersolutions require specific codelevels or coordinated codeupdates. If the device is partof a cluster solution, verify thatthe latest level of code issupported for the clustersolution before you update thecode.4. Remove both adapters.5. Replace the PCIe adapter.6. Replace the extender card.7. (Trained service technicianonly) Replace the systemboard.Redundancy Bckup Mem Status hasbeen reduced.Error Redundancy has been lostand is insufficient to continueoperation.1. Check the system-event logfor DIMM failure events(uncorrectable or PFA) andcorrect the failures.2. Re-enable mirroring in theSetup utility.IMM Network Initialization Complete. Info An IMM network hascompleted initialization.No action; information only.Certificate Authority %1 hasdetected a %2 Certificate Error.(%1 = IBM_CertificateAuthority.CADistinguishedName;%2 = CIM_PublicKeyCertificate.ElementName)Error A problem has occurred withthe SSL Server, SSL Client,or SSL Trusted CA certificatethat has been imported intothe IMM. The importedcertificate must contain apublic key that correspondsto the key pair that waspreviously generated by theGenerate a New Key andCertificate Signing Requestlink.1. Make sure that the certificatethat you are importing iscorrect.2. Try importing the certificateagain.Ethernet Data Rate modified from%1 to %2 by user %3.(%1 = CIM_EthernetPort.Speed;%2 = CIM_EthernetPort.Speed;%3 = user ID)Info A user has modified theEthernet port data rate.No action; information only.48 System x3200 M3 Types 7327 and 7328: Problem Determination and Service Guide
