IBM x3630 M4 Type 7158 Installation And User Manual

Also see for System x3630 M4: Product guide Manual

Contents

6. Connect the power cord to a properly grounded electrical outlet.7. If the server is powered on, make sure that the error LED on the power supplyis not lit, and that the dc power LED and ac power LED on the power supplyare lit, indicating that the power supply is operating correctly.8. If you are replacing a power supply with one of a different wattage in theserver, apply the new power information label provided over the existing powerinformation label on the server. Power supplies in the server must be with thesame power rating or wattage to ensure that the server will operate correctly.9. If you are adding a power supply to the server, attach the redundant powerinformation label that comes with this option on the server cover near thepower supplies.10. If you have other devices to install or remove, do so now. Otherwise, go to“Completing the installation” on page 89.86 System x3630 M4 Type 7158: Installation and User’s Guide