IC Realtime AVS-D2118VF User Manual

Contents

IC Realtime AVS-D2118VF User Manual Manual pdf 11 page image

5Figure 3-2Step 1Take the installation position map from the accessories bag and then put it on the surface of the ceiling orthe wall according to the cable exit position. Dig three holes according to the installation position map andthen take three expansion bolts from the accessories bag and put them to the holes you just dug.Step 2Use inner hex wrench to remove the three case locking screws and then remove the dome enclosure.Step 3Adjust the pedestal position according to the cable exit mode (ceiling/side). Pull the cable through thecable side exit at the installation surface and the pedestal (Please skip this step if you want to use ceilingexit mode). Line up the screw holes at the bottom of the pedestal to the expansion bolts in the installationsurface. Put three self-tapping screws to expansion bolts and then secure firmly. Now the pedestal is onthe installation surface.Step 4

/ 13

Related manuals for IC Realtime AVS-D2118VF