IC Realtime AVSZ4112T User Manual

IC Realtime AVSZ4112T User Manual Manual pdf 11 page image

Open the transparent enclosure, there are two dial switch buttons on the PCB of one side of thespeed dome (There are labels.). You can use them to set speed dome protocol, baud rate, addressand etc. See Figure 2-2 .After setup, you need to click on-off button or go to the OSD menu to select restart option toreboot the device to activate new setup.Figure 2-22.2.2 Baud Rate and ParityPlease note the IR speed dome can automatically recognize the industrial standard protocol,PELCO-D. PELCO-P. Usually you do not need to set the protocol.The interface is shown as in Figure 2-3.Figure 2-3Please refer to the baud rate sheet for detailed information.1 2 Baud RateOFF OFF 9600bpsON OFF 4800bpsOFF ON 2400bpsON ON 1200bps4