11USER’S MANUAL※ Select one of the following 5 modes, as appropriate for your purpose.◆ ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.(sodium light inclusion)◆ INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.◆ MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using theATW or AWC mode. After that switch to MANUAL mode, fine-tune the White Balance and then pressthe Function Setup switch.◆ AWC→SET : To find the optimal luminance level for the current environment, point thecamera towards a sheet of white paper and press the Function Setup switch. If the environment changes,readjust it.☞ NOTE■ White Balance may not work properly under the following conditions. In this caseselect the AWC mode.① When the color temperature of the environment surrounding the subject is out of thecontrol range (e.g. clear sky or sunset).② When the ambient illumination of the subject is dim.③ If the camera is directed towards a fluorescent light or is installed in a place whereillumination changes dramatically, the White Balance operation may become unstable.● SSDR SettingSSDR illuminates darker spots of an image while retaining the same light level for brighterspots to even out the overall brightness of images with high contrast between bright anddark spots.MAIN SETUP1.LENS2.EXPOSURE3.WHITE BAL4.SSDRDCATWOFF1. When the SETUP menu screen is displayed, select 'SSDR' by using the switch sothat the arrow indicates 'SSDR'.2. Use the switch to change the SSDR level according to the contrast between brightand dark areas.