IC Realtime ICIP360L4 Quick Start Manual

Contents

IC Realtime ICIP360L4 Quick Start Manual Manual pdf 10 page image

52 InstallationImportant Before the installation, please make sure the installation surface can sustain atleast 3X weight of the bracket and the camera.2.1 Device InstallationPlease refer to Figure 2- 1 for device installation information.Figure 2- 1Step 1Use the inner hex wrench from the accessories bag to unfasten the 3 hex screws on the dome cameraenclosure and then open the dome enclosure.Step 2Take the installation position diagram from the accessories bag and then paste it on the installationceiling or the wall according to the monitor area. Please dig three bottom holes of the plasticexpansion bolts according to the diagram. Take three expansion bolts from the accessories bag andthen insert them to the holes you just dug and then fix firmly.Note:If you need to dig a hole to pull through the cable on top of installation surface, you need to dig a cableexit hole on the installation surface according to the installation positioning diagram.If you need to pull through the cable on the side, you need to dig through the U-shape exit hole on theside of chassis to form a cable access, and then pull the cable through the side exit hole on thechassis.Step 3