IC Realtime N6 Series Quick Start Manual

IC Realtime N6 Series Quick Start Manual Manual pdf 5 page image

11 Hardware Installation and ConnectionNote: All the installation and operations here should conform to your localelectric safety rules.1.1 Check Unpacked DVRWhen you receive the DVR from the forwarding agent, please check whether there is any visibledamage. The protective materials used for the package of the DVR can protect most accidentalclashes during transportation. Then you can open the box to check the accessories.Please check the items in accordance with the list on the warranty card (Remote control isoptional). Finally you can remove the protective film of the DVR.NoteRemote control is not a standard accessory and it is not included in the accessory bag.1.2 About Front Panel and Rear PanelFor detailed information of the function keys in the front panel and the ports in the rear panel,please refer to the User’s Manual included in the resource CD.The model label in the front panel is very important; please check according to your purchaseorder.The label in the rear panel is very important too. Usually we need you to represent the serialnumber when we provide the service after sales.1.3 After Remove the ChassisPlease check the data cable, power cable, COM cable and main boar cable connection is secureor not.1.4 HDD InstallationYou can refer to the User’s Manual for recommended HDD brand.Please follow the instructions below to install hard disk.This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.2. Remove the HDD upperbracket3. Now you can see the bottombracket1. Loosen the screws of theupper cover.