IC Realtime P2000M Series User Manual
                                  | |
Contents
| 
User’s GuidePage 25 of 344.10 LLDP ConfigurationPicture 4.10.1 LLDP ConfigurationSwitches support LLDP(Link Layer Discovery Protocol), which can define switchcapacity, management address, device tags and port tags asdifferent(TLV(type/length/value) and save them in LLDPDU (Link Layer DiscoveryProtocol Data Unit). These information will be released to the direct-connected neighbordevice, neighbor devices will save these information based on MIB(ManagementInformation Base) . These information will be used for network management systemexamination or judge link communication condition.LLDP information can be configured in above page, including transmission interval,holdtime Multiplier,retransmission delay and transmission delay.Enable LLDP or Disable LLDP can be configured. Users can also configure theinformation transmitted to neighbor devices, like port description, system name, systemdescription, system property and management address.4.11 SNMP Configuration4.11.1 SNMP system configurationPicture 4.11.1 SNMP System ConfigurationSNMP(Simple Network Management Protocol) is Internet-standard protocol formanaging devices on IP networks.It consists of a set of standards for network |
Related manuals for IC Realtime 18G-16POE-Manage
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine