ICON Inspire 5air Owner's Manual
                                                        | |
Contents
| 
SECTION 1Getting StartedConnecting your InSpire-air series keyboard systemConnect the Inspire-air series keyboard to your computer via the USB ports.Choose a USB port on your Mac/PC and insertthe wide (flat) end of the USB cable. Connectthe cable's square end to the Inspire-air. Turnon your Inspire-air and your Mac/PC'soperating system should automatically “see”the new hardware and notify you that it isready to use.(Note: If you are connected to a computer with poweredUSB capacity, you will not need to use the externalpower supply. If you are not using a USB connection, thepower supply will be required.)1Connect your Inspire-air to an external synthesizer or sound module.239Connect external hardware such as a drum machine or another keyboard.Connect the MIDI OUT on the equipment youwish to control to the MIDI IN port on yourInspire-air.(Note: The power cord is required when operating via theMIDI ports only.)Use the MIDI OUT connector on your Inspire-air toconnect to an input port on your external device.(Note: A USB device and a traditional MIDI device can both beused at the same time with this configuration. MIDI via USB isalways enabled.)a bEscF1F2F3F4F5F6F7F8F9F10F11F12PrtscsysrqpauseBreakLnsDelHomePgupPgDNEnd$~`！1··2345677890））*—-+=#￥%*##QWERTYUIOP{}|ASDFGHJKL:;ZXCVBNM<>?TabCapsLookShiftCtrlAltAltGrCtrlBackspace[]|EnterShiftintelMac & PC |
Related manuals for ICON Inspire 5air
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine