ICP DAS USA GW-7553 Quick Start User Manual

Contents

software configuration

ICP DAS USA GW-7553 Quick Start User Manual Manual pdf 3 page image

on The connection is error with PROFIBUS Master device orPROFIBUS system configuration is not correct.off PROFIBUS system configuration is correct.It is normal operation.on Data exchange mode.It is normal operation.RUNoff GW-7553 module is not in data exchange mode.3. Establish connection with GW-7553Before establish the connection between DP-Master and GW-7553, usersshould obey the following steps first.1. First, users must load theelectronic device description file(GSD file) of the GW-7553 intothe DP-Master.2. And then set the parameters andconfigurations.3. Finally change your DP-masterfrom offline state to operatestate. The GW-7553 will beinitialized. If there is no erroroccurs, GW-7553 proceeds intodata exchange state. At themeantime, if there is any erroroccurs, GW-7553 will return towait for parameterization.4. Software configurationGSD filePlease copy the GSD file (IPDS0C0D.gsd) and the bitmap file (ICP_7553.bmp, GW_7553.bmp) from the CD of the GW-7553 module into the Profibusconfiguration tool.File->CopyGSD(Directory: --> CD:\profibus\gateway\gw-7553\gsd\) the example of how to load GSD fileHere, we use the hilscher CIF50-PB PROFIBUS communication interface toshow how to load GW-7553’s GSD file step by step.GW-7553 PROFIBUS/Modbus TCP Gateway Quick Start (Version 1.10, May/2012) PAGE：3