ICP DAS USA I-7530A-MR User Manual

Also see for I-7530A-MR: User manual Quick start

Contents

ICP DAS USA I-7530A-MR User Manual Manual pdf 28 page image

I-7530A-MR Modbus RTU to CAN Converter User’s Manual (Version 1.07, 06/2016) ------------- 283.2.4 Set the CAN parametersSelect the communication parameters of the CAN port and check the“Enable CAN Filter” item to make the CAN filter enable if necessary.About how to set the CAN Filter, please refer to the section 3.3.Figure 3-11: The CAN port of I-7530A-MR configuration.3.2.5 Set the “Pair Connection” parameterWhen users select the “Pair Connection” communication mode, thefunctions, “End of Command”, “Fixed Tx CAN ID” and “Response withCAN ID”, are useful. In pair connection mode, all commands written to I-7530A-MR COM port will be transferred to the CAN bus directly. For moredetail information about pair connection mode, please refer to the section3.4.Figure 3-12: The configuration for Pair connection.