ICP DAS USA I-7540D-WF User Manual

ICP DAS USA I-7540D-WF User Manual Manual pdf 25 page image

I-7540D-WF CAN to Wi-Fi Converter User’s Manual (Ver. 2.0, Jan/2012) ------------- 25 Wi-Fi configurationWi-Fi configuration interface of I-7540D-WF is shown as below, suchas Wi-Fi connection mode, SSID, WLK, WLCH, Encryption, and so forth.The detailed description is as the following table.Figure 3-4: Wi-Fi Configuration InterfaceAP Mode：Operation Mode Server：Set I-7540D-WF for the TCP Server mode.Client：Set I-7540D-WF for the TCP Client mode.Wi-Fi Mode AP：Use the wireless access point way for connection and transmission.(Must have Wi-Fi AP)SSID Service Set Identifier: Connected devices must be with the same SSID, SSIDlength must not exceed 20 characters.WLCH0~13：Wi-Fi transmission channel setting, connected devices must with thesame channel.Setting 0 (Auto) for automatically channel modulation with Wi-Fi AP.Encryption NONE / WEP64 / WEP128 / WPA / WPA2: Encryption of Wi-Fi, connecteddevices must with the same encryption.WLKKey of Encryption，connected devices must with the same Key.WEP-64 ：Key length must be 10 characters.WEP-128：Key length must be 26 characters.WPA ：Key length must between 8~64 characters.WPA2 ：Key length must between 8~64 characters.Characters of key should be in range of: [0 ~ 9] or [A ~ F] or [a ~ f].