ICP DAS USA I-8092F Getting Started Manual

Also see for I-8092F: Getting started manual User manual

Contents

ICP DAS USA I-8092F Getting Started Manual Manual pdf 24 page image

http://www.icpdas.com I8092F Getting Started ManualVer.2.3242.3.6 Manual Pulse Generator Input Signal (EXP+,EXP-)The signals, EXP+ and EXP-, are used for manual pulsar signals. The followingdiagram is an example connection for the external inputs. User can set the signals asfixed pulse CW/CCW mode, continuous pulse CW/CCW mode, or A/B phase manualpulsar mode by using the setting in section 3.5.Fig. 2.15 EXP+/- connection diagram2.3.7 General Purpose Output signals(Servo On/Off)The following diagram is a digital output signal for driver Servo On/Off signal. Theoutput signal enable or disable the driver.Fig. 2.16 Servo On/Off signal connection diagram