ICP DAS USA PCI-P8R8 User Manual
Also see for PCI-P16C16: User manualSoftware manualQuick start guide
                                        | |
Contents
|
JP2: Ground isolated protection jumper for PEX-P8POR8i/P16POR16ionlyThis JP2 jumper is used to select the isolated or non-isolated of ground for PEX-P8POR8i/P16POR16i only. As shown in Figure 1-7, the user needs to connectPin1-2 to obtain the ground isolation protection, which is the default setting.However, for the ground non-isolation, the Pin2-3 for the JP2 jumper should beconnected.The figure below shows how to select the ground isolation type:JP2 JP2GND IsolationProtection(Default Setting)GND Non-IsolationProtection123123Figure 1-12: Jumper SettingsPCI-P16R16 Series User Manual (Ver.2.8, Apr. 2011, PMH-013-28) 16 |
Related manuals for ICP DAS USA PCI-P16C16
ICP DAS USA PCI-M512 User Manual
ICP DAS USA PCI-D96SU User Manual
ICP DAS USA PCI-1202L User Manual
ICP DAS USA PISO-P8R8U User Manual
ICP DAS USA PCI-1002L User Manual
ICP DAS USA PCI-1002H User Manual
ICP DAS USA PCIe-LM4 User Manual
ICP DAS USA PCIe-S112 User Manual
ICP DAS USA PCIe-8620 User Manual
ICP DAS USA PCI-P8R8 Quick Start Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine