UA-5200 Series User Manual V4.3 ICP DAS363.3. Setting Procedures and Steps Procedures for Project/Function Setting:The function setting procedure for the UA series controllers is to set up from the left to theright of the main menu functions. The “Function Wizard” even provides the “Step Box” fornew users to follow the steps and prevent from selecting the wrong function, e.g. the stepsof the commonly used project about the Modbus communication and conversion with theOPC UA protocol are listed as follows:Function/Project Procedures:Controller Setting > Module Setting > Connecting OPC UA (in IoT Platform) > Conversion >File Setting > ExecutionMain Menu:Step Box of the Function Wizard:The chapter 2 provides an example for user to quickly know the setting procedure, and thechapter 4 provides various commonly used projects and functions for user to apply. Steps for List Setting:About the List setting of module, connection…, they have the similar steps as below:1. Select the port number, name… for the list (module, connect…)2. Give a name or nickname, normally default name: Name3. Click the button [ ] to add a list of module, connect…4. Click the button [Edit] to enter the Content Setting page5. Set up the list content, and then click [Save] to back to the list page.EX: Modbus TCP Module List:2. Give the name3. Click add 1. Select the port4. Click Edit to set the content
