ICP DAS USA VXC-112U User Manual

Also see for VXC-112U: User manual

ICP DAS USA VXC-112U User Manual Manual pdf 19 page image

VXC-114U/144U/144iU User’s Manual (Ver. 1.2, Mar.11, 2009) -----193. Software InstallationICP DAS provides following device drivers for most operation systems such as WindowsNT 4.0 and Windows 2000/XP/2003/Vista32. These Windows drivers provide full interrupt-driven, buffered I/O for each COM ports. And also supports the Plug & Play mechanism for easyinstallation.VxCard_NT_Vista32_V204.exe:This is the VXC Card driver for Windows NT 4.0, 2000/XP/2003 and Vista32.Note:Please refer to “Quick Start” for getting the location of setup program on CD.For Windows users to access COM ports, please refer to the “Serial Communications inWin32” article for programming information. It can be found by searching on thehttp://msdn.microsoft.com.This chapter shows you the detail steps to install these drivers.Note:For more information about COM port number selection, please refer to Section 2.2“COM Port Mapping & Board ID”.