ICP DAS USA ZB-2510 User Manual
                            | |
Contents
| 
ZB-2510 Series User Manual, Ver. 1.2 Page 94.2 ZigBee Repeater usage1. Broadcast Mode:A diagram showing the typical usage for a ZigBee repeater that is forwardingdata using broadcast mode is shown below:In the initial stages of constructing a ZigBee network, the ZigBee Host willdetermine which repeater will be the forward spot of the default datatransmission route. The designated repeater will forward the host data to theZigBee Device and ZigBee DIO modules.2. User-defined Route Mode:Any repeater operating in this mode needs to be configured using a uniquerepeater ID number and with a second repeater ID number (*1, *2) that defineswhere this repeater should forward data to when it receives the ZigBeeDevice data (*3).Repeater ID 01 02 03 04 13 14Repeater forwarding datareceived from the ZigBeedevice (*a)00 (*b) 01 02 03 ... ... 12 13Repeater configuration table 1 |
Related manuals for ICP DAS USA ZB-2510
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine